Prefab panels

Wigo Group produce high quality Prefabricated insulated wooden frame panels

  • floor panels

  • internal walls

  • internal bearing walls

  • exterior walls

  • ceilings panels

  • roof panels

                                     

CONSTRUCTION TIMBER

Wigo Group offers construction timber which is used for construciton of any prefabricated panel houses structure: roof, floor, interior and exterior walls, ceiling panels etc.

Timber is dried in certified kilns, planed and calibrated.

Calibrated timber of 12-18% moisture content level is graded as per stress and strength requirements applicable to C24 or C32 category timber.

 

These elements or panels (walls, floors, roof structures) are assembled in our factory according to:

  • wigo group standard

  • can be customized according to the clients project.

Wigo Group Standard Prefab Panels

Ask for price

OSB Usage

  • sheathing of interior and exterior walls. OSB panels can be used with all types of interior and exterior finishing materials
  • roof sheathing. Good sound insulation, high stiffness and ability to withstand significant snow and wind loads allow to use OSB panels as an underlayment for shingles, concrete and metal tiling, slating and other roofing materials
  • I-joists – supporting floor and wall structures in timber houses.
  • Manufacturing of SIP panels consisting of two outer OSB layers and a core polystyrene foam layer
  • stiff basis for thermal panels
  • removable formwork for concrete works (multi-use formwork), concrete platforms. Sanded and overlayed OSB panels can be used repeatedly as a concrete formwork
  • subfloor, floor repair. OSB can be used both as continuous flooring and load bearing joists
  • single floor – in light structures OSB panel can be used directly as flooring
  • furniture –frames of upholstered furniture, chairs, cabinet furniture, home built-in furniture (coat closets, shelving units, wall wardrobes)
  • stairs, landings, scaffoldings
  • temporary construction site fencing, coverings for structural openings (windows, doors)
  • shipping crates and pallets, shelving units, exhibition stands, furniture shelves, shop counters, table tops, bill boards;
  • partition walls for ships and railcars
  • structures for auto vehicles, trailer floorings and truck bodies

OSB Quality Features:

  • Environmental safety
  • Dimensional stability, homogenous structur
  • Absence of defects (checks, voids, chippings)
  • High bending strength, high elasticity
  • Smooth and solid surface
  • Resistance to damage and deformation in service conditions (warping, checking, delamination)
  • Durability
  • Easy cutting, processing and usage
  • High fasteners withdrawal resistance
  • Convenient installation
  • Low waste generation
  • High sound insulation (sound absorption) performance
  • Low thermal conductivity
  • High abrasion resistance
  • Light weight, convenient size, wide product rage
  • Easy transportation
  • Suitable for humid conditions
  • Rot-fungi-and-bio resistance
  • High fire resistance
  • Low price

Ask for price

Ultralam™ OSB Product Line

OSB Format (mm.) Thickness 6 mm. Thickness 8 mm. Thickness 9 mm. Thickness 10 mm. Thickness 11 mm. Thickness 12 mm. Thickness 15 mm. Thickness 18 mm. Thickness 22 mm.
Ultralam OSB-3 2500х1250 * * * * * * * * *
Ultralam OSB-3 2440х1220 * * * * * * * * *
T&G 4 2500х1250           * * * *
T&G 4 2500х625           * * * *

Standard bundles

Thickness, mm. Size, mm. Pieces per bundle Board volume, m³ Average density, kg/m³ Bundle volume, m³ Average gross bundle weight, kg
6 2500х1250 120 0,019 630 2,250 1418
8 2500х1250 88 0,025 630 2,200 1386
9 2500х1250 80 0,028 630 2,250 1418
10 2500х1250 68 0,031 630 2,125 1339
11 2500х1250 60 0,034 630 2,063 1293
12 2500х1250 56 0,038 630 2,100 1323
15 2500х1250 48 0,047 630 2,250 1418
18 2500х1250 40 0,056 630 2,250 1418
22 2500х1250 32 0,069 630 2,200 1386

Technical Parameters of Ultralam™ OSB

Property Standard value for 6-10 mm thick boards (nominal) Standard value for 11-17 mm thick boards (nominal) Standard value for 18-25 mm thick boards (nominal) Standard value for 26-31 mm thick boards (nominal) Standard value for 32-40 mm thick boards (nominal)
MOR, Major Axis, MPa, min. 22 20 18 16 14
MOR, Minor Axis, MPa, min. 11 10 9 8 7
MOE, Major Axis, MPa, min. 3500 3500 3500 3500 3500
MOE, Major Axis, MPa, min. 1400 1400 1400 1400 1400
Tensile strength perpendicular to the board’s surface, MPa, min. 0,34 0,32 0,30 0,29 0,26
Thickness swelling/24hr., min. 15 15 15 15 15